Electric Units Manufactured in the UK since 1970
High & Ultra-High Pressure Electric Water Jetting Units
Clean Power. Quiet Efficiency. Unmatched Reliability.
Our range of electric-driven high and ultra-high pressure water jetting units deliver the same performance and build quality as our diesel models — with reduced noise, zero emissions, and minimal maintenance requirements.
Operating at pressures from 500 to 2,800 bar (7,250 – 40,600 psi), with flow rates up to 207 l/min (54.9 gpm) and power ratings up to 535 HP (400 kW), these systems are designed for continuous, heavy-duty industrial operation.
Each unit is manufactured and assembled at our West Sussex factory, where it undergoes a three-hour full-load testto monitor and record performance, safety, and efficiency.
These units are used across a wide range of industries, including:
-
Surface cleaning and coating removal
-
Descaling and decontamination
-
Heat-exchanger, pipe, and vessel cleaning
-
Subsea cleaning and offshore maintenance
-
Industrial process cleaning and surface preparation
Need a diesel-driven alternative? Visit our Diesel Water Jetting Units to view the full range.
Key Features
-
Solid ceramic or tungsten-carbide plungers for maximum wear resistance
-
Burst disc assembly or safety valve for overpressure protection
-
IE3 foot-mounted 4-pole electric motors, IP55, Class F insulation, Class B temperature rise, TEFC, fitted with PTC thermistors — suitable for 400 V / 3 ph / 50 Hz and 480 V / 3 ph / 60 Hz
-
Stainless steel water tank for durability and corrosion resistance
-
Automatic pump protection switches for low inlet pressure, low oil pressure, and high oil temperature
-
Manual pressure-adjusting valve for precise operator control
-
Certified crashframes for maximum structural protection and ease of transport
-
Star-delta control panel with isolator, start/stop, hour counter, safety shutdown circuit, and emergency stop
-
PILZ safety relay with remote E-stop terminals, all housed in a coated steel IP65 enclosure
-
ATEX Zone 1 or Zone 2 compliant motors and starter panels available
High Pressure Electric Units
| Model | Configuration | Max Power | Max Pressure | Max Flowrate |
|---|---|---|---|---|
| HP40 EC | Crashframe Unit | 40 HP / 30 kW | 1,000 bar @ 16 l/min (14,500 psi @ 4.3 gpm) | 27 l/min @ 600 bar (7.1 gpm @ 8,700 psi) |
| HP65 EC | Crashframe Unit | 65 HP / 48 kW | 1,000 bar @ 23 l/min (14,500 psi @ 6 gpm) | 34 l/min @ 650 bar (8.9 gpm @ 9,425 psi) |
| HP120 EC | Crashframe Unit | 120 HP / 90 kW | 1,400 bar @ 30 l/min (20,300 psi @ 8 gpm) | 44 l/min @ 1,100 bar (11.7 gpm @ 15,950 psi) |
| HP220 EC | Crashframe Unit | 220 HP / 160 kW | 1,400 bar @ 62 l/min (20,300 psi @ 16.4 gpm) | 83 l/min @ 1,000 bar (21.9 gpm @ 14,500 psi) |
| HP300 EC | Crashframe Unit | 300 HP / 225 kW | 1,400 bar @ 77 l/min (20,300 psi @ 20.5 gpm) | 124 l/min @ 1,000 bar (32.9 gpm @ 14,500 psi) |
| HP500 EC | Crashframe Unit | 500 HP / 375 kW | 1,400 bar @ 129 l/min (20,300 psi @ 34.2 gpm) | 207 l/min @ 1,000 bar (54.9 gpm @ 14,500 psi) |
Ultra-High Pressure Electric Units
| Model | Configuration | Max Power | Max Pressure | Max Flowrate |
|---|---|---|---|---|
| UB30 EC | Crashframe Unit | 220 HP / 160 kW | 2,800 bar @ 30 l/min (40,600 psi @ 7.9 gpm) | 44 l/min @ 2,000 bar (11.7 gpm @ 29,000 psi) |
Manufactured in the UK – Distributed by Middle East Equipment Supplies
All electric jetting systems are designed and manufactured in the United Kingdom by Hughes Pumps Ltd, a globally recognised leader in high-pressure water-jetting technology.
Middle East Equipment Supplies proudly serves as the authorised regional distributor, offering sales, technical assistance, and after-sales support across the Middle East.
Middle East Equipment Supplies — Innovation powered by precision engineering.
Share
Print